Preliminary Inspection

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Always adjust the alignment with the vehicle on a flat surface.

NOTE: If alignment is out of specification, inspect and replace any damaged or worn suspension parts before making any adjustments.

Check and adjust the wheel alignment with the vehicle under unladen conditions. "Unladen conditions" means that the fuel, engine coolant, and lubricants are full; and that the spare tire, jack, hand tools and mats are in their designated positions.
Check the tires for incorrect air pressure and excessive wear. Refer to Tire .
Check the wheels for deformation, cracks, and other damage. Remove the wheel and check wheel run out. Refer to Inspection .
Check the wheel bearing axial end play. Refer to Inspection .
Check the shock absorbers for leaks or damage.
Check each fastener for looseness or damage.
Check each suspension component and the frame for damage.
Check the wheelarch height in unladen conditions. Refer to Wheelarch Height (Unladen*1) .