LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (Maintenance (5.6L)) >> Periodic Maintenance >> Chassis And Body Maintenance >> Axle And Suspension Parts >> Inspection - Wheel Alignment >> Camber, Caster, And Kingpin INCLINCATION Angles Inspection

Camber, Caster, And Kingpin INCLINCATION Angles Inspection

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure camber and caster of both the right and left wheels.

    Camber and caster

    : Refer to Wheel Alignment (Unladen*1) .
  2. If outside the specified value, adjust camber and caster to specification. Refer to Adjustment - Wheel Alignment .
scientia non olet · About LEMON Manuals