LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Seat (Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Seatback Thermal Electric Device Sensor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SEATBACK THERMAL ELECTRIC DEVICE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect seatback thermal electric device connector.
    3. Check resistance between seatback thermal electric device terminals.

      Seatback thermal electric device

      Resistance

      (Approx.)

      Terminals

      3

      4

      1000? *

      * : When sensor temperature is 25°C (77°F)

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace seatback thermal electric device. Refer to Seatback Thermal Electric Device .

scientia non olet · About LEMON Manuals