LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Seat Belts - Crew Cab) >> Basic Inspection >> Component Inspection >> Inspection >> Rear Seat Belt Outer Retractor Off-Vehicle Check

Rear Seat Belt Outer Retractor Off-Vehicle Check

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat belt retractor. Refer to Exploded View .
  2. Slowly pull out webbing while tilting the seat belt retractor forward from the mounted position without twisting the seat belt retractor as shown.

    A  : The webbing can be pulled out if the retractor is tilted 15° degree or less.

    GNSJMHIA1064Z-064Courtesy of NISSAN NORTH AMERICA, INC.

    B  : The webbing can not be pulled out if the retractor is tilted 45° degrees or more.

    NOTE: A and B show tilting angles.

    SYMBOL

    : Front

  3. Replace the seat belt retractor if it does not operate within specifications.