LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Ventilation System) >> Removal And Installation >> Blower Unit >> Blower Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the heating and cooling unit assembly. Refer to Removal and Installation .
  2. Disconnect the harness connector from the blower motor.
  3. Remove screws and separate blower unit from heating and cooling unit assembly.
scientia non olet · About LEMON Manuals