Removal and Installation: Installation
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
WARNING:
- After installation is complete, perform additional services (Zero point reset) when installing occupant classification system sensors. Refer to Description .
- Zero point reset must be performed every time the front passenger seat is removed.
- Zero point reset is done after the front passenger seat is installed in vehicle and all nuts and bolts are tightened to specification.
CAUTION:
- Do not damage harness connector during installation.
- After installation is complete, check that no system malfunction is detected causing air bag warning lamp to illuminate.
- If a malfunction is indicated by air bag warning lamp after repair or replacement of malfunctioning parts, perform SRS final check. Refer to SRS Final Check .