Removal and Installation: Removal
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Always check the air bag diagnosis sensor unit ECU discriminated number (identification number) or part number using CONSULT.
- Disconnect the battery or batteries, then wait at least three minutes. Refer to Battery Disconnect .
- Disconnect the harness connector from the seat belt pre-tensioner. Refer to Removal and Installation .
- Remove center console or front center seat. Refer to Removal and Installation (Center console) or Removal and Installation - Center Seat (Front center seat).
- Disconnect the harness connectors from the air bag diagnosis sensor unit.CAUTION: Do not damage the air bag diagnosis sensor unit harness connectors.
- Remove bolts and air bag diagnosis sensor unit.CAUTION:
- Do not reuse the air bag diagnosis sensor unit bolt and nuts.
- Replace the air bag diagnosis sensor unit if any SRS air bag has been deployed or if any front seat belt pre-tensioner has been deployed.
- Replace the air bag diagnosis sensor unit if it has been dropped or sustained an impact.
- Do not strike the air bag diagnosis sensor unit.