LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (SRS Airbag) >> Removal And Installation >> Crash Zone Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery or batteries, then wait at least three minutes. Refer to Battery Disconnect .
  2. Remove front under cover. Refer to Removal and Installation .
  3. Disconnect the harness connector from the crash zone sensor.
  4. Remove crash zone sensor nut, then remove crash zone sensor and bracket.
    CAUTION:
    • Replace crash zone sensor if it has been dropped or sustained an impact.
    • Do not strike crash zone sensor.
    • Replace crash zone sensor if either driver air bag or front passenger air bag has been deployed.
    • Do not reuse crash zone sensor nut.
scientia non olet · About LEMON Manuals