LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Heater & Air Conditioning Control System - Automatic Air Conditioner) >> Removal And Installation >> Variable Blower Control >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove glove box assembly and housing. Refer to Removal and Installation .
  2. Disconnect harness connector from variable blower control.
  3. Remove screws (A), then remove variable blower control (1).
GNSALIIA1157Z-157Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals