Work Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Use "Manual Configuration".
If an error occurs during configuration, start over from the beginning.

CHECK DATA PART NO. (TYPE ID)
1. Use FAST (service parts catalog) to search A/C auto amp. "DATA PART NO. (TYPE ID)".
2. Write down "DATA PART NO. (TYPE ID)".
GO TO 2 .
WRITE CONFIGURATION
CONSULT Configuration
1. Select "Manual Configuration" of "HVAC".
2. Select the "DATA PART NO. (TYPE ID)" found using FAST (service parts catalog) to write the "DATA PART NO. (TYPE ID)" into the A/C auto amp.
GO TO 3 .
VERIFY DATA PART NO. (TYPE ID)
Compare the "DATA PART NO. (TYPE ID)" written into the A/C auto amp. with the one found using FAST (service parts catalog) to confirm they match.

Do DATA PART NOs match?

YES

GO TO 4 .

NO

GO TO 2 .
PERFORM SUPPLEMENTARY WORK
1. Perform self-diagnosis of all systems.
2. Erase self-diagnosis results.
GO TO 5 .
OPERATION CHECK
Confirm that each function controlled by A/C auto amp. operates normally.

Work End.