LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Steering System) >> Removal And Installation >> Steering Linkage >> Inner And Outer Sockets >> Removal and Installation - Inner Socket >> Removal

Removal and Installation - Inner Socket: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove outer socket. Refer to Removal and Installation - Outer Socket .
  2. Remove cotter pin (A) and loosen nut (B) from inner socket. Discard cotter pin.
    GNSALGIA0284Z-284Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse cotter pin.
    NOTE: 4WD model shown, 2WD model similar.
  3. Separate inner socket from relay rod using suitable tool.
    CAUTION: Leave inner socket nut half threaded on inner socket to prevent damage to threads and to prevent suitable tool from coming off suddenly.
  4. Remove inner socket.
scientia non olet · About LEMON Manuals