LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Steering System) >> Removal And Installation >> Steering Gear And Linkage >> Removal and Installation - Outer socket >> Removal

Removal and Installation - Outer socket: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front wheel and tire using power tool. Refer to Removal and Installation .
  2. Loosen inner socket lock nut (A).
    GNSAWGIA0334Z-334Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: To prevent damage, hold outer socket (1) across flats using suitable tool while loosening inner socket lock nut (A).
  3. Remove cotter pin (A) and loosen outer socket nut (B) from outer socket. Discard cotter pin.
    GNSALGIA0345Z-345Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse cotter pin.
  4. Separate outer socket from steering knuckle using suitable tool.
    CAUTION: Leave the outer socket nut half threaded on the outer socket to prevent damage to threads and to prevent the suitable tool from coming off suddenly.
  5. Remove outer socket nut and outer socket.
scientia non olet · About LEMON Manuals