LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Steering System) >> Basic Inspection >> Steering Wheel >> Inspection >> Steering Wheel Turning Force

Steering Wheel Turning Force

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Park vehicle on a level, dry surface and set parking brake.
  2. Verify that tires are inflated to specified pressure. Refer to Tire .
  3. Start engine.
  4. Bring power steering fluid up to operating temperature of 50°- 80°C (122°- 176°F).
  5. Check steering wheel turning force using Tool when steering wheel has been turned 360° from the neutral position.
    G04134793Courtesy of NISSAN NORTH AMERICA, INC.

    Tool

    : - (J-44372)

    Steering wheel turning force

    : Refer to Steering Wheel .

  6. If steering wheel turning force is out of specification, inspect steering column. Refer to Inspection .
  7. If steering column meets specification, inspect steering gear and linkage. Refer to Inspection .