LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Telematics System) >> DTC/Circuit Diagnosis >> B2EF0 TCU >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CONFIRM DTC 

    Confirm which DTC is detected.

    Is DTC B2EF0 [CIRC VOLT BELOW THRESHOLD] detected ?

    YES

    GO TO 2 .

    NO

    GO TO 3 .

  2. CHARGE INTERNAL BATTERY 
    1. Start engine.
    2. Run engine for 30 minutes to allow TCU internal battery to charge.

    GO TO 3 .

  3. PERFORM DTC CONFIRMATION PROCEDURE AGAIN 

    Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure .

    Is DTC B2EF0 detected again?

    YES

    Replace TCU. Refer to Removal and Installation .

    NO

    Inspection End.