LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Security Control System (DTC/Circuit Diagnosis)) >> DTC / Circuit Diagnosis >> DTC B26F7: BCM >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "BCM".
    3. Touch "ERASE".
    4. Perform DTC CONFIRMATION PROCEDURE for DTC B26F7. Refer to DTC Description .

    Is DTC detected?

    YES

    GO TO 2.

    NO

    Inspection End.

  2. REPLACE BCM 
    1. Replace BCM. Refer to Removal and Installation .
    2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.

    Inspection End.

scientia non olet · About LEMON Manuals