LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Security Control System (DTC/Circuit Diagnosis)) >> DTC / Circuit Diagnosis >> DTC B2560: Starter Control Relay >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC B2560 is displayed with DTC U1000 or U1010, first perform the trouble diagnosis for DTC U1000 or U1010.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. U1000: Refer to DTC Description . U1010: Refer to DTC Description .

    NO

    GO TO 2.

  2. CHECK DTC WITH IPDM E/R 

    SYMBOL CONSULT

    Check "Self Diagnostic Result" mode. Refer to DTC Index .

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Replace IPDM E/R. Refer to Removal and Installation .

  3. CHECK INTERMITTENT INCIDENT 

    Refer to Intermittent Incident .

    Inspection End.

scientia non olet · About LEMON Manuals