LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Security Control System (DTC/Circuit Diagnosis)) >> DTC / Circuit Diagnosis >> DTC B210D: Starter Relay >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK STARTER RELAY POWER SUPPLY CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect IPDM E/R harness connector.
    3. Check voltage between IPDM E/R harness connector and ground.

      IPDM E/R

      Ground

      Voltage

      (Approx.)

      Connector

      Terminal

      E17

      3

      Ground

      Battery voltage

    Is the inspection result normal?

    YES

    Replace IPDM E/R. Refer to Removal and Installation .

    NO

    Check harness for open or short between IPDM E/R and battery.

scientia non olet · About LEMON Manuals