LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Security Control System (DTC/Circuit Diagnosis)) >> DTC / Circuit Diagnosis >> DTC B210C: Starter Control Relay >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Check "Self Diagnostic Result" mode.
    3. Touch "ERASE".
    4. Perform DTC Confirmation Procedure.

      Refer to DTC Index .

    Is the DTC B210C displayed again?

    YES

    Replace IPDM E/R. Refer to Removal and Installation .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals