DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Turn the power supply position to start under the following conditions and wait for at least 1 second:
- CVT selector lever is in the P (Park) or N (Neutral) position.
- Depress the brake pedal
- Check "Self Diagnostic Result" mode.
Is DTC detected?
YES
Refer to Diagnosis Procedure .
NO
Inspection End.
- Turn the power supply position to start under the following conditions and wait for at least 1 second: