Seat Cushion: Assembly

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is in the reverse order of disassembly.

Install new hog rings on the seat cushion trim in original positions.

Courtesy of NISSAN NORTH AMERICA, INC.
Use only one hog ring in each designated location.
Make sure hog rings are correctly fastened around both the seat cushion trim and seat cushion pad wires.
Use NISSAN standard hog rings and tools to assemble.
Make sure hook and loop fastener is pressed into place after seat cushion trim is assembled.
Smooth out all wrinkles during assembly.