RH Seat: Seatback: Assembly

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is in the reverse order of disassembly.

Tighten the seatback assembly bolts to specification in the order shown. Refer to Exploded View .

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION:

Always route side air bag module harness in original location. Replace any deformed or damaged clips with same type and color. Always install clips in the original location in the harness.
After work is completed, check that no system malfunction is detected causing the air bag warning lamp to illuminate.
If a malfunction is detected by the air bag warning lamp after repair or replacement of the malfunction parts, perform the SRS final check. Refer to SRS Final Check .
Route seat back strap through the seat cushion tether anchor.