LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Automatic Drive Positioner (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Tilt Telescopic Switch Ground Circuit >> Diagnosis Procedure >> Automatic Drive Positioner (DTC/Circuit Diagnosis)

Automatic Drive Positioner (DTC/Circuit Diagnosis)

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ADP STEERING SWITCH (TILT & TELESCOPIC SWITCH) GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect ADP steering switch (tilt & telescopic switch).
    3. Check continuity between ADP steering switch (tilt & telescopic switch) connector M41 and ground.

    ADP steering switch (tilt & telescopic switch)

    Ground

    Continuity

    Connector

    Terminal

    M41

    3

    Yes

    Is the inspection result normal?

    YES

    Check intermittent incident. Refer to Intermittent Incident .

    NO

    Repair or replace harness.

scientia non olet · About LEMON Manuals