Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- DATA MONITOR
CONSULT
- Select "Data Monitor" mode of "AUTO DRIVE POS.".
- Select "SLIDE SW-FR", "SLIDE SW-RR".
- Check that the function operates normally according to the following conditions:
Monitor item
Condition
Status
SLIDE SW-FR
Sliding switch (forward)
Operate
ON
Release
OFF
SLIDE SW-RR
Sliding switch (backward)
Operate
ON
Release
OFF
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .