Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
CONSULT
- Select "Data Monitor" mode of "AUTO DRIVE POS.".
- Select "MIR/SEN RH U-D", "MIR/SEN RH R-L".
- Check that the function operates normally according to the following conditions:
Monitor item
Condition
Value
MIR/SEN RH U-D
Door mirror RH
Close to peak
3.4 V
Close to valley
0.6 V
MIR/SEN RH R-L
Close to right edge
0.6 V
Close to left edge
3.4 V
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .