Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- DATA MONITOR
CONSULT
- Select "Data Monitor" mode of "AUTO DRIVE POS.".
- Select "LIFT RR PULSE".
- Check lifting sensor (rear) signal under the following conditions:
Monitor item
Condition
Value
LIFT RR PULSE
Seat lifting (rear)
Operate (upward)
Change (decrease)
Operate (downward)
Change (increase)
Release
No change
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .