LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Automatic Drive Positioner (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Door Mirror Motor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DOOR MIRROR MOTOR-I 

    Check that door mirror motor does not trap foreign objects and does not have any damage.

    Refer to Exploded View .

    Is the inspection result normal?

    YES

    GO TO STEP 2  .

    NO

    Replace door mirror actuator. Refer to Removal and Installation .

  2. CHECK DOOR MIRROR MOTOR-II 
    1. Turn ignition switch OFF.
    2. Disconnect door mirror.
    3. Apply 12 V to each power supply terminal of door mirror motor.

      Door mirror connector

      Terminal

      Operational direction

      (+)

      (-)

      D4 (LH)

      D107 (RH)

      3

      2

      RIGHT

      2

      3

      LEFT

      1

      3

      UP

      3

      1

      DOWN

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace door mirror actuator. Refer to Removal and Installation .