LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Automatic Drive Positioner (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. STEP 1 

    Turn ignition switch ON and wait at least 2 seconds.

    GO TO STEP 2  .

  2. STEP 2 

    SYMBOL CONSULT

    Check "Self Diagnostic Result" mode of "AUTO DRIVE POS.".

    Is the DTC detected?

    YES

    Perform diagnosis procedure. Refer to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    NO

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals