LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Automatic Drive Positioner (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2130: EEPROM >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Check "Self Diagnostic Result" mode of "AUTO DRIVE POS.".
    3. Erase the DTC.
    4. Perform DTC confirmation procedure. Refer to DTC Description .

    Is the DTC displayed again?

    YES

    Replace driver seat control unit. Refer to Removal and Installation .

    NO

    GO TO STEP 2  .

  2. CHECK INTERMITTENT INCIDENT 

    Refer to Intermittent Incident .

    Inspection End.

scientia non olet · About LEMON Manuals