Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Under the following conditions, ABS is activated and vibration is felt when brake pedal is lightly depressed (just place a foot on it). However, this is normal.

When shifting gears
When driving on slippery road
During cornering at high speed
When passing over bumps or grooves [approximately 50 mm (1.97 in) or more]
When pulling away just after starting engine [at approximately 10 km/h (6 MPH) or higher]

SYMPTOM CHECK 1
Check that there are pedal vibrations when the engine is started.

Do symptoms occur?

YES

GO TO STEP 2

NO

Inspect the brake pedal.
SYMPTOM CHECK 2
Check that there are ABS operation noises when the engine is started.

Do symptoms occur?

YES

GO TO STEP 2

NO

Perform "Self Diagnostic Result" of "ABS". Refer to CONSULT Function (ABS) .
SYMPTOM CHECK 3
Check symptoms when electrical component (headlamps, etc.) switches are operated.

Do symptoms occur?

YES

Check if there is a radio, antenna, antenna lead wire, or wiring close to the control unit. If there is, move it farther away.

NO

Inspection End.