Removal and Installation: Removal
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Remove center console. Refer to Removal and Installation .
- Remove yaw rate/side/decel G sensor nuts.CAUTION:
- Do not use power tools to remove the yaw rate/side/decel G sensor.
- Do not drop or strike the yaw rate/side/decel G sensor.
- Disconnect harness connector from yaw rate/side/decel G sensor and remove the yaw rate/side/decel G sensor.