CONSULT Function (AUTO DRIVE POS): Notes
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must be cycled OFF - ON (for at least 5 seconds) - OFF. If this step is not performed, the BCM may not go to "sleep mode", potentially causing a discharged battery and a no-start condition.
The auto drive positioner system can be checked and diagnosed for component operation with CONSULT.