Additional Service When Removing Battery Negative Terminal: Description

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Each function is reset to the following condition when the battery terminal is disconnected.

Function	Condition	Procedure
Entry/exit assist	ON	Perform initialization
		Set slide amount ^*1
Intelligent Key interlock	Erased	Perform initialization
		Perform storing

^*1 : Default value is 40 mm.

NOTE: Notice that disconnecting the battery when detected DTC are present will erase the DTC memory.