LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Horn Function >> Diagnosis Procedure >> Security Control System (DTC/Circuit Diagnosis)

Security Control System (DTC/Circuit Diagnosis)

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HORN FUNCTION 

    Check horn function with horn switch.

    Do horns sound?

    YES

    GO TO 2 .

    NO

    Perform the trouble diagnosis for horn circuit. Refer to the appropriate Wiring Diagram .

  2. CHECK IPDM E/R POWER SUPPLY CIRCUIT 
    1. Disconnect horn relay connector.
    2. Check continuity between IPDM E/R harness connector and horn relay harness connector.

      IPDM E/R

      Horn relay

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      E122

      48

      H-1

      1

      Yes

    3. Check continuity between IPDM E/R harness connector and ground.

      IPDM E/R

      Ground

      Continuity

      Connector

      Terminal

      E122

      48

      No

    Is the inspection result normal?

    YES

    Replace IPDM E/R. Refer to Removal and Installation of IPDM E/R .

    NO

    Repair or replace harness.