LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B261B: Remote Engine Start >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B261B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description .
  • If DTC B261B is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Description .

DTC No.

CONSULT screen terms (Trouble diagnosis content)

DTC Detection Condition

B261B

BCM

Diagnosis condition

When ignition switch is ON.

Signal (terminal)

-

Threshold

The BCM has requested ignition OFF but ECM keeps the engine running for more than 10 seconds after the OFF request was made

Diagnosis delay time

-