LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B260F: Engine Status >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 

    If DTC B260F is displayed with DTC U1000 or U1010, first perform the trouble diagnosis for DTC U1000 or U1010.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. U1000: Refer to DTC Description . U1010: Refer to DTC Description .

    NO

    GO TO 2 .

  2. INSPECTION START 
    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "BCM" using CONSULT.
    3. Touch "ERASE".
    4. Perform DTC CONFIRMATION PROCEDURE for DTC B260F. Refer to DTC Confirmation Procedure .

    Is DTC detected?

    YES

    GO TO 3 .

    NO

    Inspection End.

  3. REPLACE ECM 

    Replace ECM. Refer to Removal and Installation (VK56VD) or Removal and Installation (Cummins 5.0L).

    Inspection End.

scientia non olet · About LEMON Manuals