Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK A/T SHIFT SELECTOR (PARK POSITION SWITCH)
- Turn ignition switch OFF.
- Disconnect A/T shift selector connector.
- Check continuity between A/T shift selector (park position switch) terminals.
A/T shift selector (park position switch)
Condition
Continuity
Terminals
5
4
Selector lever
P (Park) position
No
Other than above
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Replace A/T shift selector. Refer to Removal and Installation .