LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2555: Stop Lamp >> Component Inspection (Stop Lamp Relay)

Component Inspection (Stop Lamp Relay)

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK STOP LAMP RELAY 
    1. Disconnect stop lamp relay.
    2. Check continuity between stop lamp relay terminals.
      G04889330Courtesy of NISSAN NORTH AMERICA, INC.

      Stop lamp relay

      Condition

      Continuity

      Terminals

      3

      5

      12 V direct current supply between terminals 1 and 2

      Yes

      No current supply

      No

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace stop lamp relay.

scientia non olet · About LEMON Manuals