DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Make the conditions that BCM enters in the low power consumption mode (BCM sleep condition).
Refer to System Description .
- Turn ignition switch ON.
- Check DTC in "Self Diagnostic Result" mode of "BCM".
Is DTC detected?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.
- Make the conditions that BCM enters in the low power consumption mode (BCM sleep condition).