LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B210C: Starter Control Relay >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B210C is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description .
  • If DTC B210C is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Description .

DTC No.

CONSULT screen terms (Trouble diagnosis content)

DTC Detection Condition

B210C

START CONT RLY OFF

Diagnosis condition

When the ignition switch is ON.

Signal (terminal)

-

Threshold

IPDM E/R detects that the relay is stuck at OFF position even if the following conditions are met for about 1 second:

  • Starter control relay ON/OFF signal from BCM
  • Transmission range switch input signal

Diagnosis delay time

-