Conditions of Vehicle (Operating Conditions)

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

"ENGINE START BY I-KEY" in "WORK SUPPORT" is ON when setting on CONSULT.
One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.

PERFORM WORK SUPPORT
CONSULT

Perform "INSIDE ANT DIAGNOSIS" in "Work support" mode of "INTELLIGENT KEY".

Refer to CONSULT Function (BCM - INTELLIGENT KEY) .

GO TO 2 .
SELF DIAGNOSTIC RESULT
CONSULT

Perform "Self Diagnostic Result" mode of "BCM".

Are any DTCs detected?

YES

Refer to DTC Index .

NO

GO TO 3 .
CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.

Refer to Component Function Check .

Is the operation normal?

YES

GO TO 4 .

NO

Repair or replace malfunctioning parts.
CONFIRM THE OPERATION
Confirm the operation again.

Is the inspection normal?

YES

Check intermittent incident. Refer to Intermittent Incident .

NO

GO TO 1 .