DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC PRIORITY
If DTC B26F6 is displayed with DTC U1000 or U1010, first perform the trouble diagnosis for the DTC U1000 or U1010.
Is applicable DTC detected?
YES
Perform diagnosis of applicable. U1000: Refer to DTC Description . U1010: Refer to DTC Description .
NO
GO TO 2.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Turn ignition switch ON under the following conditions, and wait for 0.5 seconds or more:
- AT selector lever is in the P (park) or N (neutral) position.
- Do not depress brake pedal.
- Perform "Self Diagnostic Result" mode of "BCM".
Is DTC B26F6 detected?
YES
Go to Diagnosis Procedure .
NO
Inspection End.
- Turn ignition switch ON under the following conditions, and wait for 0.5 seconds or more: