DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Turn ignition switch ON under the following conditions, and wait for 2 seconds or more:
- AT selector lever is in the P (park) or N (neutral) position.
- Do not depress brake pedal.
- Perform "Self Diagnostic Result" mode of "BCM".
Is DTC B26F2 detected?
YES
Go to Diagnosis Procedure .
NO
Inspection End.
- Turn ignition switch ON under the following conditions, and wait for 2 seconds or more: