LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Control System (Symptom Diagnosis & Removal And Installation) (CUMMINS 5.0L)) >> Removal And Installation >> SCR Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Battery acid and battery acid fumes are extremely dangerous and can cause severe burns and explosion. To help reduce the risk of personal injury:
  • Wear appropriate goggles and protective clothing.
  • Always properly ventilate the area where the service is being performed.
  • Never allow battery fluid to come in contact with skin, eyes, fabrics or painted surfaces.
  • To avoid arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last.
  • If acid contacts eyes, skin or clothing, immediately flush with water for 15 minutes and seek medical attention.
  1. Disconnect the battery or batteries. Refer to Battery Disconnect .
  2. Disconnect the SCR control unit harness connectors (B) and remove the bolt (A) from the SCR control unit (1).
    GNSALBIA2676Z-676Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the SCR control unit.