LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Engine Control System (DTCS, Symptom Diagnosis & Removal And Installation) (5.6L) (8 Of 8)) >> DTC/Circuit Diagnosis >> Removal And Installation >> VVEL Control Module >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Additional service must be preformed when replacing VVEL control module. Refer to Description .
  1. Remove the cowl top extension. Refer to Removal and Installation - Cowl Top Extension .
  2. Disconnect the harness connector from the VVEL control module.
  3. Remove nuts and VVEL control module.
  4. Remove bolts and VVEL control module bracket (if necessary).
scientia non olet · About LEMON Manuals