Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ENGINE COOLANT TEMPERATURE SENSOR 1
- Turn ignition switch OFF.
- Disconnect engine coolant temperature sensor 1 harness connector.
- Remove engine coolant temperature sensor 1.
- Check resistance between engine coolant temperature sensor 1 terminals by heating with hot water as shown in the figure.
Engine coolant temperature sensor 1
Condition
Resistance (kΩ)
+
-
Terminal
1
2
Temperature [°C (°F)]
20 (68)
2.35 - 2.73
50 (122)
0.68 - 1.00
90 (194)
0.236 - 0.260
Is the inspection result normal?
YES
INSPECTION END
NO
Replace engine coolant temperature sensor 1. Refer to Exploded View .