Data Monitor
|
Item name |
Unit |
Remarks |
|
Solenoid 1 low pressure |
kPa |
Displays factory default oil pressure (Low side) of C1 clutch solenoid valve written on TCM |
|
Solenoid 1 high pressure |
kPa |
Displays factory default oil pressure (High side) of C1 clutch solenoid valve written on TCM |
|
Solenoid 2 low pressure |
kPa |
Displays factory default oil pressure (Low side) of C2 clutch solenoid valve written on TCM |
|
Solenoid 2 high pressure |
kPa |
Displays factory default oil pressure (High side) of C2 clutch solenoid valve written on TCM |
|
Solenoid 3 low pressure |
kPa |
Displays factory default oil pressure (Low side) of C3 clutch solenoid valve written on TCM |
|
Solenoid 3 high pressure |
kPa |
Displays factory default oil pressure (High side) of C3 clutch solenoid valve written on TCM |
|
Solenoid 4 low pressure |
kPa |
Displays factory default oil pressure (Low side) of B1 brake solenoid valve written on TCM |
|
Solenoid 4 high pressure |
kPa |
Displays factory default oil pressure (High side) of B1 brake solenoid valve written on TCM |
|
Solenoid 5 low pressure |
kPa |
Displays factory default oil pressure (Low side) of B2 brake solenoid valve written on TCM |
|
Solenoid 5 high pressure |
kPa |
Displays factory default oil pressure (High side) of B2 brake solenoid valve written on TCM |
|
Solenoid 6 low pressure |
kPa |
Displays factory default oil pressure (Low side) of torque converter clutch solenoid valve written on TCM |
|
Solenoid 6 high pressure |
kPa |
Displays factory default oil pressure (High side) of torque converter clutch solenoid valve written on TCM |
|
Solenoid 1 stroke time |
ms |
Displays factory default stroke time of C1 clutch solenoid valve written on TCM |
|
Solenoid 2 stroke time |
ms |
Displays factory default stroke time of C2 clutch solenoid valve written on TCM |
|
Solenoid 3 stroke time |
ms |
Displays factory default stroke time of C3 clutch solenoid valve written on TCM |
|
Solenoid 4 stroke time |
ms |
Displays factory default stroke time of B1 brake solenoid valve written on TCM |
|
Solenoid 5 stroke time |
ms |
Displays factory default stroke time of B2 brake solenoid valve written on TCM |
|
Solenoid 6 stroke time 1 |
ms |
Displays factory default stroke time 1 of torque converter clutch solenoid valve written on TCM |
|
Solenoid 6 stroke time 2 |
ms |
Displays factory default stroke time 2 of torque converter clutch solenoid valve written on TCM |
|
Solenoid 6 stroke time 3 |
ms |
Displays factory default stroke time 3 of torque converter clutch solenoid valve written on TCM |
|
Adjust status |
Incomp/Initial/Comp |
Displays the status of factory default and transmission adjust |
|
Adjust year |
year |
Displays the year that data is written |
|
Adjust month |
- |
Displays the month that data is written |
|
Unit number |
- |
Displays the transmission number |
|
Number of Reprogramming |
- |
Displays the number of reprogramming |
|
Torque converter slip speed |
RPM |
Displays the torque converter slip speed |
|
Target gear 1 |
N/1GR-6GR/R/P/Other |
Displays the target gear |
|
Current gear 1 |
N/1GR-6GR/R/P/Other |
Displays the current gear |
|
Current mode |
Normal/4Low/H temp/Coast/L temp/Braking |
Displays the current shift mode |
|
Torque converter status 1 |
On/Off/Slip |
Displays the status of torque converter |
|
Shift position switch A |
On/Off |
Displays the status of transmission range switch (range signal A) |
|
Shift position switch B |
On/Off |
Displays the status of transmission range switch (range signal B) |
|
Shift position switch C |
On/Off |
Displays the status of transmission range switch (range signal C) |
|
Shift position switch PA |
On/Off |
Displays the status of transmission range switch (range signal PA) |
|
Shift position |
P/R/N/D/P-R, R-N/N-D/Abnormal |
Displays the shift position |
|
Transmission fluid temperature |
°C/°F |
Displays the fluid temperature of control valve |
|
Torque converter fluid temp |
°C/°F |
Displays the fluid temperature of torque converter |
|
Control valve fluid temp (A/D) |
- |
Displays the fluid temperature (Analog/Digital conversion value) of control valve |
|
Torq converter fluid temp (A/D) |
- |
Displays the fluid temperature (Analog/Digital conversion value) of torque converter |
|
Control valve fluid temp sensor |
V |
Displays the voltage of A/T fluid temperature sensor 2 |
|
Torq converter fluid temp sen |
V |
Displays the voltage of A/T fluid temperature sensor 1 |
|
Wheel speed |
RPM |
Displays the wheel speed |
|
Output speed 1 |
RPM |
Displays the output shaft speed |
|
Input shaft speed 1 |
RPM |
Displays the input shaft speed |
|
Torque converter slip speed |
RPM |
Displays the torque converter slip speed |
|
Output speed sensor (A/D) |
- |
Displays the output shaft speed (Analog/Digital conversion value) |
|
Input speed sensor (A/D) |
- |
Displays the input speed (Analog/Digital conversion value) |
|
Solenoid 1 pressure |
kPa |
Displays the pressure of C1 clutch solenoid valve |
|
Solenoid 2 pressure |
kPa |
Displays the pressure of C2 clutch solenoid valve |
|
Solenoid 3 pressure |
kPa |
Displays the pressure of C3 clutch solenoid valve |
|
Solenoid 4 pressure |
kPa |
Displays the pressure of B1 brake solenoid valve |
|
Solenoid 5 pressure |
kPa |
Displays the pressure of B2 brake solenoid valve |
|
Solenoid 6 pressure |
kPa |
Displays the pressure of torque converter clutch solenoid valve |
|
Solenoid 7 pressure |
kPa |
Displays the pressure of line pressure solenoid valve |
|
On/off sol 1 (control modu) |
On/Off |
Displays the output status of fail-safe solenoid valve |
|
Solenoid 1 current |
mA |
Displays the current value of C1 clutch solenoid valve |
|
Solenoid 2 current |
mA |
Displays the current value of C2 clutch solenoid valve |
|
Solenoid 3 current |
mA |
Displays the current value of C3 clutch solenoid valve |
|
Solenoid 4 current |
mA |
Displays the current value of B1 brake solenoid valve |
|
Solenoid 5 current |
mA |
Displays the current value of B2 brake solenoid valve |
|
Solenoid 6 current |
mA |
Displays the current value of torque converter clutch solenoid valve |
|
Solenoid 7 current |
mA |
Displays the current value of line pressure solenoid valve |
|
On/off solenoid 1 |
On/Off |
Displays the output status of fail-safe solenoid valve |
|
Up sol cut field effect transist |
On/Off |
Displays the cut status of solenoid upper field effect transistor |
|
Low sol cut field effect transist |
On/Off |
Displays the cut status of solenoid lower field effect transistor |
|
ACC status |
Befor init/Initializ/Low volt/On/Off |
Displays the status of accessory |
|
IGN status |
On/Off |
Displays the status of ignition |
|
Battery voltage |
V |
Displays the battery voltage |
|
ACC voltage |
V |
Displays the accessory voltage |
|
Battery voltage (A/D) |
- |
Displays the battery voltage (Analog/Digital conversion value) |
|
ACC voltage (A/D) |
- |
Displays the accessory voltage (Analog/Digital conversion value) |
|
Pressure switch |
On/Off |
Displays the status of oil pressure switch |
|
Power hold output |
On/Off |
Displays the status of self-hold power |
|
Number of key cycles |
- |
Displays the number of key cycles |
|
General denominator |
- |
Displays the general denominator |
|
1GR ratio fault numerator |
- |
Displays the numerator of 1GR incorrect ratio |
|
1GR ratio fault denominator |
- |
Displays the denominator of 1GR incorrect ratio |
|
1GR ratio fault rate |
% |
Displays the rate of 1GR incorrect ratio |
|
2GR ratio fault numerator |
- |
Displays the numerator of 2GR incorrect ratio |
|
2GR ratio fault denominator |
- |
Displays the denominator of 2GR incorrect ratio |
|
2GR ratio fault rate |
% |
Displays the rate of 2GR incorrect ratio |
|
3GR ratio fault numerator |
- |
Displays the numerator of 3GR incorrect ratio |
|
3GR ratio fault denominator |
- |
Displays the denominator of 3GR incorrect ratio |
|
3GR ratio fault rate |
% |
Displays the rate of 3GR incorrect ratio |
|
4GR ratio fault numerator |
- |
Displays the numerator of 4GR incorrect ratio |
|
4GR ratio fault denominator |
- |
Displays the denominator of 4GR incorrect ratio |
|
4GR ratio fault rate |
% |
Displays the rate of 4GR incorrect ratio |
|
5GR ratio fault numerator |
- |
Displays the numerator of 5GR incorrect ratio |
|
5GR ratio fault denominator |
- |
Displays the denominator of 5GR incorrect ratio |
|
5GR ratio fault rate |
% |
Displays the rate of 5GR incorrect ratio |
|
6GR ratio fault numerator |
- |
Displays the numerator of 6GR incorrect ratio |
|
6GR ratio fault denominator |
- |
Displays the denominator of 6GR incorrect ratio |
|
6GR ratio fault rate |
% |
Displays the rate of 6GR incorrect ratio |
|
R GR ratio fault numerator |
- |
Displays the numerator of reverse incorrect ratio |
|
R GR ratio fault denominator |
- |
Displays the denominator of reverse incorrect ratio |
|
Reverse gear ratio fault rate |
% |
Displays the rate of reverse incorrect ratio |
|
Lock up stuck off numerator |
- |
Displays the numerator of lock-up OFF stuck |
|
Lock up stuck off denominator |
- |
Displays the denominator of lock-up OFF stuck |
|
Lock up stuck off rate |
% |
Displays the rate of lock-up OFF stuck |
|
Neutral gear fault numerator |
- |
Displays the numerator of neutral gear malfunction |
|
Neutral gear fault denominator |
- |
Displays the denominator of neutral gear malfunction |
|
Neutral gear fault rate |
% |
Displays the rate of neutral gear malfunction |
|
Solenoid 5 stick numerator |
- |
Displays the numerator of B2 brake solenoid valve stick malfunction |
|
Solenoid 5 stick denominator |
- |
Displays the denominator of B2 brake solenoid valve stick malfunction |
|
Solenoid 5 stick rate |
% |
Displays the rate of B2 brake solenoid valve stick malfunction |
|
SP sen 2 no pulse numerator |
- |
Displays the numerator of output shaft speed no pulse malfunction |
|
SP sen 2 no pulse denominator |
- |
Displays the denominator of output shaft speed no pulse malfunction |
|
Speed sensor 2 no pulse rate |
% |
Displays the rate of output shaft speed no pulse malfunction |
|
SP sen 2 sudde slow down num |
- |
Displays the numerator of output shaft speed sudden slowdown malfunction |
|
SP sen 2 sudde slow down den |
- |
Displays the denominator of output shaft speed sudden slowdown malfunction |
|
SP sen 2 sudd slow down ratio |
% |
Displays the rate of output shaft speed sudden slowdown malfunction |
|
Turbin speed no pulse numerat |
- |
Displays the numerator of input speed no pulse malfunction |
|
Trbin speed no puls denominat |
- |
Displays the denominator of input speed no pulse malfunction |
|
Turbine speed no pulse rate |
% |
Displays the rate of input speed no pulse malfunction |
|
Oil temp reliability numerator |
- |
Displays the numerator of ATF temperature reliability malfunction |
|
Oil temp reliability denominator |
- |
Displays the denominator of ATF temperature reliability malfunction |
|
Oil temperature reliability rate |
% |
Displays the rate of ATF temperature reliability malfunction |
|
T/C temp reliability numerator |
- |
Displays the numerator of torque converter fluid temperature reliability malfunction |
|
T/C temp reliability denominat |
- |
Displays the denominator of torque converter fluid temperature reliability malfunction |
|
T/C temp reliability rate |
% |
Displays the rate of torque converter fluid temperature reliability malfunction |
|
Sol 1 high stuck numerator |
- |
Displays the numerator of C1 clutch solenoid stuck malfunction (high) |
|
Sol 1 high stuck denominator |
- |
Displays the denominator of C1 clutch solenoid stuck malfunction (high) |
|
Sol 1 high stuck rate |
% |
Displays the rate of C1 clutch solenoid stuck malfunction (high) |
|
Shift lever sequential numerat |
- |
Displays the numerator of selector lever sequential malfunction |
|
Shift lever sequent denominat |
- |
Displays the denominator of selector lever sequential malfunction |
|
Shift lever sequential rate |
% |
Displays the rate of selector lever sequential malfunction |
|
Max engine speed |
Tr/min |
Displays the maximum value of engine speed |
|
Max input shaft speed |
RPM |
Displays the maximum value of input shaft speed |
|
Max output shaft speed |
RPM |
Displays the maximum value of output shaft speed |
|
Max transmission fluid temp |
°C/°F |
Displays the maximum ATF temperature |
|
Min transmission fluid temp |
°C/°F |
Displays the minimum ATF temperature |
|
Max T/C fluid temp |
°C/°F |
Displays the maximum torque converter fluid temperature |
|
Min T/C fluid temp |
°C/°F |
Displays the minimum torque converter fluid temperature |
|
Estimated engine torque 2 |
Nm |
Displays the estimated engine torque (except for AT request) |
|
Powertrain set-point 1 |
% |
Displays the powertrain set point |
|
Pedal error 1 |
Normal/Abnormal |
Displays the status of pedal error |
|
Cruise control status 1 |
Inactive/ Recovry/Active |
Displays the status of cruise control |
|
Powertrain set-point 2 |
% |
Displays the powertrain set point (mirror) |
|
Engine speed |
Tr/min |
Displays the engine speed |
|
Estimated engine torque 1 |
Nm |
Displays the estimated engine torque |
|
Engine torque 1 |
Nm |
Displays the engine torque |
|
Accelerator position 1 |
% |
Displays the accelerator position |
|
ECM P-RUN signal 1 |
- |
Displays the P-RUN signal of ECM |
|
Torque request status 1 |
Normal/Abnormal |
Displays the status of torque request |
|
ECM P-RUN signal 1 |
- |
Displays the P-RUN signal of ECM |
|
Engine status 1 |
Stopped/Stalled/Running/Cranking |
Displays the status of engine |
|
Engine coolant temperature 1 |
°C/°F |
Displays the engine coolant temperature |
|
CAN diagnosis 1 |
Not auth/Authorise |
Displays the authorization status of CAN transmit-receive diagnosis |
|
Engine on/off 1 |
Not start/Started |
Displays the status of engine start |
|
ECM P-RUN signal 2 |
- |
Displays the P-RUN signal of ECM |
|
OBD marker signal 1 |
- |
Displays the marker signal of OBD |
|
OBD warm up cycle 1 |
Incomp/Complet |
Displays the status of OBD warm up cycle |
|
OBD general trip 1 |
Incomp/Complet |
Displays the status of OBD general trip |
|
OBD marker ID 1 |
- |
Displays the marker ID of OBD |
|
Shifting authorization 1 |
Forbid/Up/down |
Displays the status of gear hold request |
|
VDC malfunction 1 |
Normal/Abnormal |
Displays the fail status of VDC |
|
VDC P-RUN signal 1 |
- |
Displays the P-RUN signal of VDC |
|
TCS operation status 1 |
Inactive/Active |
Displays the TCS operation status |
|
VDC operation status 1 |
Inactive/Active |
Displays the VDC operation status |
|
TCS malfunction 1 |
Normal/Abnormal |
Displays the fail status of TCS |
|
Shift map change request 1 |
No requ/Warm/Cold |
Displays the status of shift schedule change request |
|
Wheel speed RR 1 |
RPM |
Displays the wheel speed (rear-right) |
|
Wheel speed RL 1 |
RPM |
Displays the wheel speed (rear-left) |
|
ABS malfunction 1 |
Normal/Abnormal |
Displays the fail status of ABS |
|
ABS operation status 1 |
Inactive/Active |
Displays the ABS operation status |
|
Manual mode (-) 1 |
On/Off |
Displays the status of manual mode switch (-) |
|
Manual mode (+) 1 |
On/Off |
Displays the status of manual mode switch (+) |
|
TOW mode switch 1 |
On/Off |
Displays the status of tow mode switch |
|
Brake switch |
Inactive/Active/Invalid |
Displays the status of stop lamp switch |
|
4WD control mode 1 |
Auto/4WD/2WD/4Low |
Displays the status of 4WD mode switch |
|
OBD general denominator 1 |
Not auth/Authorisa |
Displays the count up status of OBD general denominator |
|
4WD P-RUN signal 1 |
- |
Displays the P-RUN signal of transfer control unit |
|
Engine soak status 1 |
Incomp/Complet |
Displays the status of engine soak completion |
|
Wheel speed FR 1 |
RPM |
Displays the wheel speed (front-right) |
|
Wheel speed FL 1 |
RPM |
Displays the wheel speed (front-left) |
|
Engine derate condition 1 |
On/Off |
Displays the status of engine derate control |
|
Estimated engine torque 3 |
Nm |
Displays the estimated engine torque (except for AT request) |
|
Powertrain set-point 3 |
% |
Displays the powertrain set point |
|
Pedal error 2 |
Normal/Abnormal |
Displays the status of pedal error |
|
Cruise control status 2 |
Inactive/Active |
Displays the status of cruise control |
|
Powertrain set-point 3 |
% |
Displays the powertrain set point (mirror) |
|
Engine speed (control) |
Tr/min |
Displays the engine speed |
|
Estimated engine torque 2 |
Nm |
Displays the estimated engine torque |
|
Engine torque 2 |
Nm |
Displays the engine torque |
|
Accelerator position 2 |
% |
Displays the accelerator position |
|
ECM P-RUN signal 2 |
- |
Displays the P-RUN signal of ECM |
|
Torque request status 2 |
Normal/Abnormal |
Displays the status of torque request |
|
ECM P-RUN signal 3 |
- |
Displays the P-RUN signal of ECM |
|
Engine status 2 |
Stopped/Stalled/Running/Cranking |
Displays the status of engine |
|
Engine coolant temperature 2 |
°C/°F |
Displays the engine coolant temperature |
|
CAN diagnosis 2 |
Not auth/Authorisa |
Displays the authorization status of CAN transmit-receive diagnosis |
|
Engine on/off 2 |
Not start/Started |
Displays the status of engine start |
|
ECM P-RUN signal 3 |
- |
Displays the P-RUN signal of ECM |
|
OBD marker signal 2 |
- |
Displays the marker signal of OBD |
|
OBD warm up cycle 2 |
Incomp/Complet |
Displays the status of OBD warm up cycle |
|
OBD general trip 2 |
Incomp/Complet |
Displays the status of OBD general trip |
|
OBD marker ID 2 |
- |
Displays the marker ID of OBD |
|
Shifting authorization 2 |
Forbid/Up/down |
Displays the status of gear hold request |
|
VDC malfunction 2 |
Normal/Abnormal |
Displays the fail status of VDC |
|
VDC P-RUN signal 2 |
- |
Displays the P-RUN signal of VDC |
|
TCS operation status 2 |
Inactive/Active |
Displays the TCS operation status |
|
VDC operation status 2 |
Inactive/Active |
Displays the VDC operation status |
|
TCS malfunction 2 |
Normal/Abnormal |
Displays the fail status of TCS |
|
Shift map change request 2 |
No requ/Warm/Cold |
Displays the status of shift schedule change request |
|
Wheel speed RR 2 |
RPM |
Displays the wheel speed (rear-right) |
|
Wheel speed RL 2 |
RPM |
Displays the wheel speed (rear-left) |
|
ABS malfunction 2 |
Normal/Abnormal |
Displays the fail status of ABS |
|
ABS operation status 2 |
Inactive/Active |
Displays the ABS operation status |
|
Manual mode (-) 2 |
On/Off |
Displays the status of manual mode switch (-) |
|
Manual mode (+) 2 |
On/Off |
Displays the status of manual mode switch (+) |
|
TOW mode switch 2 |
On/Off |
Displays the status of tow mode switch |
|
Brake switch (control) |
On/Off |
Displays the status of stop lamp switch |
|
4WD control mode 2 |
OT 4Low/4Low |
Displays the status of 4WD mode switch |
|
OBD general denominator 2 |
Not auth/Authorisa |
Displays the count up status of OBD general denominator |
|
4WD P-RUN signal 2 |
- |
Displays the P-RUN signal of transfer control unit |
|
Engine soak status 2 |
Incomp/Complet |
Displays the status of engine soak completion |
|
Wheel speed FR 2 |
RPM |
Displays the wheel speed (front-right) |
|
Wheel speed FL 2 |
RPM |
Displays the wheel speed (front-left) |
|
Engine derate condition 2 |
On/Off |
Displays the status of engine derate control |
|
Torque request 1 |
Nm |
Displays the torque request value |
|
Limit/slow torque request 1 |
Nm |
This monitor item does not use |
|
Target gear 2 |
1GR-6GR/R/N or P/Failmode |
Displays the target gear |
|
Current gear 2 |
1GR-6GR/R/N or P/Failmode |
Displays the current gear |
|
Torque control type 1 |
Limit/Min |
Displays the type of torque control |
|
AT P-RUN signal 1 |
- |
Displays the P-RUN signal of TCM |
|
Torque converter status 2 |
Unlock/lock-up |
Displays the status of torque converter |
|
Output speed 2 |
RPM |
Displays the output shaft speed |
|
Input shaft speed 2 |
RPM |
Displays the input shaft speed |
|
AT P-RUN signal 2 |
- |
Displays the P-RUN signal of TCM |
|
Manual mode status 1 |
Not M/M-mode |
Displays the manual mode status |
|
AT malfunction 1 |
Normal/Abnormal |
Displays the fail status of TCM |
|
Idle up request RPM 1 |
RPM |
Displays the idle up request revolution |
|
Gear position 1 |
Off/P/R/N/D/M1-M6 |
Displays the gear position |
|
AT warning lamp 1 |
On/Off |
Displays the output status of AT CHECK indicator lamp |
|
AT high temp waring lamp 1 |
On/Off |
Displays the output status of AT OIL TEMP waring lamp |
|
Gear shift refuse buzzer 1 |
No requ/Request |
Displays the output request status of gear shift refuse buzzer |
|
TOW mode indicator request 1 |
No requ/Request |
Displays the status of tow mode indicator request |
|
ATF temperature 1 |
°C/°F |
Displays the A/T fluid temperature |
|
MIL request 1 |
No requ/Request |
Displays the status of MIL request |
|
Gear shift authorization stat 1 |
Accepted/Refused |
Displays the status of gear shift authorization |
|
Torque request 2 |
Nm |
Displays the torque request value |
|
Limit/slow torque request 2 |
Nm |
This monitor item does not use |
|
Target gear 3 |
1GR-6GR/R/N or P/Failmode |
Displays the target gear |
|
Current gear 3 |
1GR-6GR/R/N or P/Failmode |
Displays the current gear |
|
Torque control type 2 |
Limit/Min |
Displays the type of torque control |
|
AT P-RUN signal 3 |
- |
Displays the P-RUN signal of TCM |
|
Torque converter status 3 |
Unlock/lock-up |
Displays the status of torque converter |
|
Output speed 3 |
RPM |
Displays the output shaft speed |
|
Input shaft speed 3 |
RPM |
Displays the input shaft speed |
|
AT P-RUN signal 4 |
- |
Displays the P-RUN signal of TCM |
|
Manual mode status 2 |
Not M/M-mode |
Displays the manual mode status |
|
AT malfunction 2 |
Normal/Abnormal |
Displays the fail status of TCM |
|
Idle up request RPM 2 |
RPM |
Displays the idle up request revolution |
|
Gear position 2 |
Off/P/R/N/D/M1-M6 |
Displays the gear position |
|
AT warning lamp 2 |
On/Off |
Displays the output status of AT CHECK indicator lamp |
|
AT high temp waring lamp 2 |
On/Off |
Displays the output status of AT OIL TEMP waring lamp |
|
Gear shift refuse buzzer 2 |
No requ/Request |
Displays the output request status of gear shift refuse buzzer |
|
TOW mode indicator reqest 2 |
No requ/Request |
Displays the status of tow mode indicator request |
|
ATF temperature 2 |
°C/°F |
Displays the A/T fluid temperature |
|
MIL request 2 |
No requ/Request |
Displays the status of MIL request |
|
Gear shift authorization stat 2 |
Accepted/Refused |
Displays the status of gear shift authorization |