LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Automatic Transmission (Introduction, Wiring Diagrams And Basic Inspection) (Re6R01A)) >> Basic Inspection >> Additional Service When Replacing Transmission Assembly >> Work Procedure

Work Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM TRANSMISSION ADJUSTMENT 

    SYMBOL With CONSULT

    1. Start the engine.
    2. Select "Transmission adjustment" in "Work Support" in "TRANSMISSION".
    3. Perform "Transmission adjustment" according to the CONSULT display.

    WORK END

scientia non olet · About LEMON Manuals