DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- DTC CONFIRMATION PROCEDURE
CONSULT
- Erase the DTC.
- Turn ignition switch OFF.
- Perform "Self Diagnostic Result" mode of "BCM", after the ignition switch has been turned ON for 2 seconds or more.
Is any DTC detected?
YES
Refer to Diagnosis Procedure .
NO
To check malfunction symptom before repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.