Body Control System (DTC/Circuit Diagnosis)

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUSE

Check that the following fuse is not blown.

Terminal No.	Signal name	Fuse No.
131	BCM battery fuse	1 (10A)

Is the fuse blown?

YES

Replace the blown fuse after repairing the affected circuit.

GO TO 2 .

CHECK BAT BCM FUSE CIRCUIT

Disconnect BCM connector M81.

Check voltage between BCM connector M81 terminal 131 and ground.

BCM

Ground

Voltage

(Approx.)

Connector

Terminal

M81

131

Battery voltage

Is the inspection result normal?

YES

GO TO 3.

Repair or replace harness or connectors.

CHECK BATTERY SAVER OUTPUT CIRCUIT FOR SHORT TO GROUND

Turn ignition OFF.

Check continuity between BCM connector M81 terminal 129 and ground.

BCM		Ground	Continuity
Connector	Terminal
M81	129	-	No

Is the inspection result normal?

YES

Replace BCM. Refer to Removal and Installation .

Repair or replace harness or connectors.