LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Power Supply, Ground & Circuit Elements) >> Removal And Installation >> Battery Current Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal. Refer to Battery Disconnect .
  2. Disconnect harness connector from the battery current sensor.
  3. Remove nut and separate battery negative cable from the battery current sensor and remove the battery current sensor.
scientia non olet · About LEMON Manuals